Get your free quote today — call 866 873 2342
Aerial view of a boat with custom foam decking
Specialists in

Custom Marine
Decking

EVA / PE Fabrication 3D Scanned CNC Milled

We scan the real surface, model it in CAD, and mill marine-grade foam to fit it exactly. No generic kits, no guessing — boats, cooler tops, Jeeps, trucks and whatever else you put underfoot.

Scroll down
A Treadic installer rolling down a custom gray and blue EVA foam deck panel with a routed boat name
Why it matters

The one surface you actually stand on.

Bare fiberglass and factory nonskid get slick the moment they're wet, hold heat like a skillet, and start to look tired long before the rest of the rig does.

Closed-cell EVA/PE foam fixes all three at once — grip that works soaking wet, cushion that saves your knees and back, and a surface that rinses clean in seconds.

Wet grip
Textured tread that holds when the deck is soaked.
Cooler underfoot
Runs far cooler than bare gelcoat in the Florida sun.
Soft landing
Closed-cell cushion that takes the chop out of a long day.
Hose-off clean
Blood, bait and sunscreen rinse straight off.
Where it goes

If you stand on it,
we can skin it.

Same foam, same scan-to-mill process — applied wherever grip, cushion and a clean finish beat bare metal, gelcoat or carpet.

Aerial view of a center console with a full custom gray and blue EVA foam deck, underway
01 — Marine

Boat Decks

Cockpits, bow pads, casting decks, swim platforms, gunwales and steps — cut as one continuous pattern so the seams land where they should.

RTIC cooler fitted with a custom teak-pattern EVA foam top pad
02 — Gear

Cooler Tops

Turn the lid into a seat and a cutting surface. Cut to your exact cooler, hinges and latches included.

Custom navy foam pad on a Jeep Gladiator tailgate
03 — Off-road

Jeeps

Tub floors, tailgates and dash pads that drain, brush out and never soak up mud.

Foam tread panel on a truck running board
04 — Overland

Trucks

Bed rails, tailgate caps and running boards — grip for gear, protection for paint.

05 — And more

Custom
One-Offs

Docks & steps Kayaks & paddleboards Golf carts Helm & casting pads Livewell lids Gym & trailer floors
Ask about your project →
Signature service

See it before
we cut it.

We bring a 3D scanner to your rig and capture the real geometry — every curve, hatch, drain and cleat. That scan becomes a CAD model, and the CAD model becomes a photoreal rendering that lands in your inbox.

You see your own boat, in your colors, with your pattern — before a single blade touches foam. Change your mind about the tread direction or the accent line? We change the file, not the material.

01

On-site scan of the actual surface — no paper templates.

02

A rendering of your finished deck, sent to you for approval.

03

Your file stays on record — reorder or extend it any time.

Book a 3D Scan
Rendering
CAD layout of a scanned boat deck, drawn before any foam is cut
Digitising a boat deck point by point with a measuring probe
CNC router cutting plank grooves into an EVA foam sheet
How it happens

Four steps, zero guesswork

STEP 01

Scan

We come to the boat, truck or shop and capture the surface in three dimensions.

STEP 02

Design

Colors, tread pattern, seam layout and logo work — drawn up and sent to you as a rendering.

STEP 03

Mill

Our CNC router cuts the approved file out of EVA/PE sheet — clean edges, tight seams, repeatable.

STEP 04

Install

Surface prepped, marine-grade adhesive, panels set by hand. Or we ship it ready to lay down yourself.

CNC router cutting a teak-pattern EVA foam sheet
In the shop

Every groove is cut from your file, not a catalog.

Plank spacing, radius corners, drain cutouts and hatch reliefs are all part of the drawing before the router ever starts. That's how a foam deck ends up looking like it was born with the boat.

Make it yours

Colors & patterns

Two-tone foam in a dozen combinations, plus tread patterns from tight teak planking to wide-plank, diamond and brushed. Logos and hull numbers can be routed straight in.

Teak / Black
Classic plank
Storm Gray / Black
Classic plank
Sand / Walnut
Wide plank
Charcoal
Diamond
Seafoam / Slate
Classic plank
Jet Black
Brushed

Swatches shown for reference — real samples travel with us to every consultation.

See the full range →
Center console at the dock with a full custom gray and blue EVA foam deck

Licensed & insured

Fully insured for on-site work, in the yard or at your slip. Certificates available on request.

Workmanship warranty

Backed against lifting and seam failure on every deck we install ourselves.

Marine-grade materials

UV-stable closed-cell EVA/PE and 3M-class adhesive systems rated for salt water.

Cut in-house

Scanning, CAD and CNC all under one roof — no outsourcing, no lost weeks.

Good to know

Questions we get every week

Still stuck on something? Call us and talk to the person who'd actually be cutting your deck.

866 873 2342

Does foam decking fix cracks or soft spots?

No — it's a surface upgrade. Structural repairs need to happen before we lay anything down, and we'll tell you straight if we see something that should be fixed first.

Will the edges start lifting?

Not when the prep is done right. Most lifting stories come from wax, silicone or dirt left under the panel. We strip the surface back properly and use adhesive rated for constant salt exposure.

How long does an install take?

The scan is usually under an hour. From approved rendering to finished install, most projects run about one to two weeks depending on size and color availability.

Can I install it myself?

Yes. We can ship your milled panels with peel-and-stick backing and step-by-step guidance if you'd rather do it in your own driveway.

How do I take care of it?

Fresh water, a soft brush and mild soap. Skip harsh solvents and pressure-washer wands held up close, and it'll look new for years.

Get started

Let's scan
your deck.

Tell us what you're working with and we'll come out, scan it, and send back a rendering with pricing. No obligation, no pressure.

Hours
Monday – Friday
9:00 AM – 5:00 PM
Service area
Miami-Dade, Broward
& Palm Beach County
Payment accepted
ACH Zelle Cash Debit Credit

Request a quote

We reply within one business day.

By submitting you agree to be contacted about your project. We never share your details.